Mike,
It will not make any difference as long as all the band components
(crystal, capacitors, and toroids) are correct for each band.
While it is nice to have the lower band as B1 and the upper band as B2,
it is not necessary, just set each band to agree with the low/upper band
frequency in the menu.
73,
Don W3FPR
On 6/30/2024 4:44 PM, Mike Short wrote:
I have a partially assembled 20/40 kit I acquired. The directions say to
have band 1 the lowest frequency but this one is reversed. 20 is band 1 and
40 is band 2. What may be the issues with leaving it like this?
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
