SPLIT operation is easily accomplished with a single receiver K3S. Five
easy steps follows:
1. Select the band, frequency and mode of your choice as seen on VFO A.
(that's the big knob)
2. Press and release A > B button. This sets VFO A and VFO B to the
same band, frequency and mode.
3. Press and hold A > B. Upon release of A > B button one is now in
the SPLIT mode. You will observe the word "SPLIT" just above the VFO B
frequency (right side) and TX above the letter B for VFO B .
4. Adjust VFO B for the desired TX frequency. (use the small knob)
5. VFO A is the receive frequency.
That's it.
73
Bob, K4TAX
On 11/6/2023 2:36 PM, elecraft-requ...@mailman.qth.net wrote:
Message: 8
Date: Sun, 5 Nov 2023 21:12:15 -0500
From: Richard<flat...@comcast.net>
To: Elecraft Reflector<elecraft@mailman.qth.net>
Subject: [Elecraft] K3S Split Operation
Message-ID:<a6148a63-c886-4eab-82e3-7a577d7f6...@comcast.net>
Content-Type: text/plain; charset=utf-8
I am having trouble understanding both the manual and N6FN?s Mini-manual when
it comes to Split operation. I follow the ?directions? over and over but
nothing happens.
Does the fact that my K3S does not have a sub receiver mean that I can?t work
split?
If I?m wrong about that I would really appreciate a step-by-step How-To lesson
in working split.
Thanks.
Cheers,
Richard Kunc
W4KBX
-
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
