If you have the CW decoder turned on, you won't see the TX frequency
shown in the lower half (VFO B) of the K3 display.
Otherwise, the VFO B frequency is shown in the lower half of the
display.
When you turn split on, there is a little triangle flag under the "TX"
at the right end of the display that will point to the VFO B indicator,
showing that when you transmit, VFO B will control the frequency.
Turn split off, and the flag will point to the VFO A indicator again,
showing that VFO A will control both the RX and TX frequencies.
Hope that helps.
73,
-- Dave, N8SBE
On 2023-11-06 08:26, Rich wrote:
The fact that SPLIT is displayed on the screen tells you that you are
transmitting on VFO B, the TX freq does not appear in the VFO A screen
position when you TX
You do not need the REV button at all.
Just use the VFO B tuning knob to adjust your VFO B freq +1 or +5 or
whatever
You are set
Rich
On 11/5/2023 23:27 PM, Richard wrote:
OK, good idea.
1. I tune the DX station normally.
2. I tap A>B to copy A frequency to B.
3. I press and hold SPLIT to separate RX and TX.
4. While holding REV I tune about “five up” or wherever the DX is
listening.
5. I release REV and I see the DX’s frequency again.
QUESTION: When I transmit there’s no visual indication on which
frequency I’m transmitting. Should there be?
Cheers.
Richard
W4KBX
On Nov 5, 2023, at 10:11 PM, Rich <rwnewbo...@comcast.net> wrote:
It is quite simple just long press the A>B button and you will be in
SPLIT mode.
Tell us what you are doing that is not working
Rich
PS - I believe Crossband Split is not possible w/o a SUBRX, but not
within the same band.
On 11/5/2023 21:59 PM, marvwhee...@nwlink.com wrote:
Richard:
It is not necessary to have the 2nd rcvr to work split. I have used
my for 3 yrs without a 2nd rcvr and work split frequently.]
Marv
KG7V
-----Original Message-----
From: elecraft-boun...@mailman.qth.net
<elecraft-boun...@mailman.qth.net> On Behalf Of Richard
Sent: Sunday, November 5, 2023 6:12 PM
To: Elecraft Reflector <elecraft@mailman.qth.net>
Subject: [Elecraft] K3S Split Operation
I am having trouble understanding both the manual and N6FN’s
Mini-manual when it comes to Split operation. I follow the
“directions” over and over but nothing happens.
Does the fact that my K3S does not have a sub receiver mean that I
can’t work split?
If I’m wrong about that I would really appreciate a step-by-step
How-To lesson in working split.
Thanks.
Cheers,
Richard Kunc
W4KBX
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to marvwhee...@nwlink.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to rwnewbo...@comcast.net
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to flat...@comcast.net
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to rwnewbo...@comcast.net
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to n8...@densbe.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
