There was a time when one could email Elecraft support with the K3 serial number and they would send the factory Config file. Probably not 100% of the solution but it would be a start.
73, Brian, K0DTJ > On Oct 17, 2023, at 09:05, W3FPR <w3fpr...@gmail.com> wrote: > > Jim, > > It is doubtful that will work if the K3 has been set to factory defaults by > EEINIT. > > 73, > Don W3FPR > >> On 10/17/2023 11:59 AM, Jim McCook wrote: >> Dave, >> >> Open the K3 Utility and click on Calibration. Scroll down to Configure >> Crystal Filters. The top line shows the various bandwidths of the installed >> filters. You can see the big picture there with the checked boxes. >> Jim W6YA >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Elecraft@mailman.qth.net >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message delivered to w3fpr...@gmail.com > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to huntin...@coastside.net ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
