Soft smile ... putting my K2 together for a trip to Fiji ... I can build one, and will if no one has an extra one they are not using.
Thank you Paul KB9AVO On Wed, Jul 12, 2023, 4:34 PM Michael Carter <mike.car...@unh.edu> wrote: > Hi Paul, > > It does sound as though the slug-tuned inductors > on the 20 meter and 15 meter sections of the > Filter board need tweaking. As you noted, one > must remove the KAT1 ATU board from the > Filter board to access those coils. It is necessary > to jumper pins 2 and 10 of J2 on the Filter board > to route RF to the antenna connector. Once you've > done that you can proceed with the alignment > as described in the manual. > > 73, > Mike, K8CN > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to pvandyke1...@gmail.com > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
