On 6/12/2020 3:23 AM, E.H. Russell wrote:
Thanks for the scope shot and info. I compared the waveform to the QST K3S 
review, which seems to show a little over 10ms before RF appears. Is this 
because they used different settings?

I repeat my advice that keying characteristics must be evaluated in the FREQUENCY domain (as occupied bandwidth), NOT in the TIME domain (oscilloscope). The reason has been stated here many times -- it's not only the TIME of the transition that determines bandwidth, it is the SHAPE of the transition from off to on and on to off that matters, NOT the time it takes, and this cannot be seen on a scope.

73, Jim K9YC
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]

Reply via email to