KAT3A and KIO3B installed! Had a scare as I couldn't remove the bottom center screw on the right side panel, it started stripping. I had this issue on one of the front panel screws about a year ago when I was trying to replace my VFO B encoder. I was able to get the KAT3A installed without completely removing the right side panel.
I should have spring for over night shipping, I was counting on the USPS to get it to me by Friday, but the package didn't arrive until today. Elecraft shipped it on Wednesday, but I guess since they aren't Amazon, the USPS doesn't bend over backward for them. The good news was while waiting for the K3 upgrades, I finally finished soldering the K1. That's been a 10 year odyssey, that I'll write about at a later date. I need to find the power cable I made up for it to finish testing and to get it on the air. That's what happens when you take over 10 years to build a kit. Back on the subject, ahh, it is nice to have a little less clutter on the desk. The KAT3A tunes my antenna on all bands, even 160, which was a shock! Not that I'll be doing much down there with my indoor attic antenna. I might buy one of the custom FSK interfaces, mine looks like something between a spider and a plate of spaghetti. Anyone in the market for an original K3 I/O board? 73 de Joseph M. Durnal - NE3R On Thu, Jan 10, 2019 at 10:39 PM Brian Hunt <[email protected]> wrote: > I bet the KEY macro in N1MM+ would work. Purely speculation on my part > since I haven't tried it but it works fine for CW. > > 73, > Brian, K0DTJ > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
