Many thanks, Don. Now AM mode came back. But I do not remember when I set AM MODE OFF.
73 de JH3SIF, Keith > 2019/01/14 7:53、Don Wilhelm <[email protected]>のメール: > > Keith, > > Go to the menu and make sure AM MODE is turned ON. > > 73, > Don W3FPR > > On 1/13/2019 5:37 PM, Keith Onishi wrote: >> Hello, >> Tapping MODE switch on my KX3 with MCU 02.90, most latest firmware, switches >> mode from SSB -> CW -> FM, then back to SSB. It does skips AM. >> I have not switched to AM for long time. I think I was able to select AM by >> tapping MODE before. >> I went through KX3 Owner’s Manual to look for any configuration to skip any >> specific mode, but found none. >> Sending “MD5;” from KX3 utility software switches KX3 to AM mode. So MPU is >> OK on selecting a mode except switching the mode by MODE switch. >> I restored my KX3 configuration backed up almost 6 months ago, but the >> symptom is same. Then I reloaded the latest firmware to my KX3, but the same >> result. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
