I thought I found _all_ the problems with my KX3080, but I guess not. THe receiver is now very insensitive on all bands. It works, but I don't hear an increase in noise on any band when I connect an antenna. Tracing from the antenna jack toward the mixer, I get a good increase in noise when I touch the antenna to the junction of L6 and the RF gain pot. On the antenna side of L6, there's no increase in noise.
Rereading the assembly instructions, the manual says to connect A on the KXB3080 to B on the KX1, and B on the KXB3080 to A on the KX1, because the markings for A and B on the KX1 are incorrect. But if this is the case, why was the KXB30 connected A to A and B to B? I'm wondering if this is my problem... 73, Bruce N7CEE _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
