I guess I don't understand what you want to accomplish.
If you want the VFO A to be in the center of the display, simply change
the mode from FIXED to TRACKING. That will keep the VFO frequency
centered - no macros required.
73,
Don W3FPR
On 12/7/2016 6:54 PM, K5MWR via Elecraft wrote:
Sean
Apologies as I did not read your full post when I sent the earlier
response.
I too see the same type of response and need to execute an involved
macro multiple times in order to get it to fully function. Depends on
what frequency/band and mode I am starting with. I would like to have a
macro to take me to a digital mode such as JT65 using something like below.
BN03;FA00007076000;MD6;DT0;PC020;BW0400;FT0;SB0;SWH09;#MKA1;#MFA+00007077000;#MKB1;#MFB+00007078000;#SPN000050;#CTF+00007077750;
My understanding is that the time to execute band or large frequency
changes in indeterminate and that there is no simple pause command that
can be inserted to allow the steps to complete.
I also find that the inability to know what mode such as VOX/PTT you are
in causes problems. There was mention at one time that a VOX command
was to be implemented but have not seen that.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
