Probably not the problem, but just in case, have you changed the addresses (dip switch) on all the XVs?
BTW, I'm still waiting for my XV432; you must be a tester. On Sun, 19 Mar 2006 14:55:06 +0000, [EMAIL PROTECTED] wrote: >Hi folks, > >An odd problem popped up with the K2/XV station here. I had occasion to >change all the assignments of all the TRN channel assignments in both the >transverters and of course in the K2 menu. Everything works FB except the TRN >6 channel. > >On that channel only, the K2 VFO refuses to tune. When I spin the VFO knob, >the front panel indication shows "405900" and refuses to move. If I turn up >the audio volume, I can hear noise when I move the VFO knob (except in the >Lock mode). The noise is not there when any other band is chosen. All other >TRN channels and HF bands tune normally. > >If I enter a frequency directly from the keypad, (say 432100.0 for instance) >the front panel indicates that the K2 accepted that frequency, but when I try >to tune around, the indication returns to "405900". The K2 will keep the >keypad entered freq after band changes and on-off cycles. > >This problem exists when the serial interface cable is disconnected from the >K2. > >When I select RIT, the K2 front panel displayed freq changes within the RIT >range as expected. > >The TRN6 menu settings are: FR = 432, IF = 28, OFS = 0.00, Out = L 1.00, and >Adr = trn6 > >When I had my 432 transverter assigned to TRN 4, the tuning through the K2 VFO >worked FB. > >FYI, I'm using the KRC2 band decoder for TRN 1 and TRN 2 decoding.(not for TRN >6), and all the decoded functions work well, including VFO tuning.. > >Anyone have any ideas why my VFO locks up on the TRN 6 channel only?? > >Bill, W7QQ >_______________________________________________ >Elecraft mailing list >Post to: [email protected] >You must be a subscriber to post to the list. >Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > >Help: http://mailman.qth.net/subscribers.htm >Elecraft web page: http://www.elecraft.com _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
