> The transmit light goes on but no power out and failure to > connect.
Are you seeing four bars of ALC? It sounds like you do not have the audio levels set correctly. Use DATA A, set MENU:MIC+LIN = OFF and MENU:MIC SEL=LINE IN. Set your software TX level at about 80%, set the Windows Volume Mixer for your sound card output "Speaker (USB Audio CODEC)" at 80%, adjust the K3/K3S Mic Gain for four bars of ALC and set the output power level using the PWR control. 73, ... Joe, W4TV On 1/25/2016 9:58 PM, Reed Bumgarner wrote:
I'm having trouble getting RMS Express to transmit. I've tried various combinations of RTS PTT settings and am using the digital setting in the RMS software. The transmit light goes on but no power out and failure to connect. Do I need to use port share software with the KIO3B? Is there another setting I'm overlooking? Thanks for any insights. Reed AA1RB
______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
