When I tried measuring in the negative lead, I found zero amps.
The problem is that the grounding system in my station setup
bypasses the negative lead, probably in several ways, letting me
power the K3 up with no connection to the negative power supply
lead at all.
Cheers - Bill, AE6JV
On 10/18/13 at 4:51 PM, [email protected] (Jim Brown) wrote:
If you're talking about me, the false readings I was getting
from the Watts Up meter were in the range of 40 mA, and a Fluke
measured 4 mA in the positive lead. There may, however, be
something happening on the negative lead that is causing the
false readings. I don't have a fixture yet to put a Fluke
there. I should do that.
-----------------------------------------------------------------------
Bill Frantz | Concurrency is hard. 12 out | Periwinkle
(408)356-8506 | 10 programmers get it wrong. | 16345
Englewood Ave
www.pwpconsult.com | - Jeff Frantz | Los Gatos,
CA 95032
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
