>>I would suspect a display problem with the Watts Up ... >I pulled out my Fluke and an adapter I had made years ago for a current probe >and measured both radios. Both are drawing 4 mA when off...
I had a 'current drawn when off' incident a few years ago myself. K3 'current when off' was over 1 amp when measured with a Watts Up right at the back of the K3. The problem turned out to be an anomalous reading on the Watts Up, caused by an IC-756 ProIII that was running, mounted on the shelf above the K3. The HV from the display was affecting the reading of the Watts Up. I turned the Pro3 off, and the reading on the Watts Up dropped to around the 4ma mark. Ralph, VE7XF ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
