Mark, I have followed your instructions, and I agree with you on all.
But I am at this point; I right click on the speaker icon, then click on 'playback devices'. I have iMic selected as default device under speakers. When I play a music file, I see the level indicator at the far right following the music volume, but no sound. (My headset and iMic work fine on my XP computer) I wonder what I have overlooked. Dick, n0ce ----- Original Message ----- From: Mark Petiford To: Phil Kane ; [email protected] Sent: Thursday, June 13, 2013 12:33 AM Subject: Re: [Elecraft] USB Sound Card for Win7 Phil, No special drivers required. I use Win7 64 bit and it works great. Try this: Right click on the little speaker icon in the lower right corner of the screen and click on "recording devices". In the window that opens, right click on "iMic Microphone USB audio system", and click on Properties. In the window that opens, click on the levels tab and be sure the volume is turned up and the button on the right says it is enabled. You may need to experiment with the volume slider vs. the MIC/Line switch in the iMic. I usually keep it on Line, and the volume slider at about 50%. When I turn the volume up to about 20 on the KX3, I get a good waterfall display. I have been using an iMic for years, and once I make sure it is enabled and the volume is turned up, it works great for either I/Q or as an input to digital mode software (I use FLDIGI) input. Keep in mind that sometimes, other software will change your settings, so you have to check them again if it suddenly seems to stop working. If you want to use its output as an input to the MIC jack on the KX3, you will have to go thru a similar setup for the "iMic Speakers". I think this little USB Soundcard is one of the best buys I have made. When I first got it, I too had problems setting it up, but I was simply making it more complicated than it needed to be. I really think it is easier under Win7 than XP because everything can be selected starting with a right click on the little speaker icon. It all starts there. No reason to open volume controls and figure out which menu you need to use next. Hope this helps. Mark KE6BB ________________________________ From: Phil Kane <[email protected]> To: [email protected] Sent: Wednesday, June 12, 2013 9:39 PM Subject: Re: [Elecraft] USB Sound Card for Win7 On 6/12/2013 9:13 PM, Joe Subich, W4TV wrote: >> In setting up my new Win7 computer I find that my iMic USB soundcard >> device is not compatible. > > Huh? iMic should be supported as USB Audio CODEC (the standard USB > Audio Class Device). That's what baffles me. The system appears to load the above driver, but no audio gets through. Taking the device and plugging it into a WinXP machine - audio gets through. The manufacturer's site says that the device is not compatible with Vista so I suspect that it is not compatible with Win7 'as is". 73 de K2ASP - Phil Kane Elecraft K2/100 s/n 5402 >From a Clearing in the Silicon Forest Beaverton (Washington County) Oregon ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
