IMPORTANT - If you do this, make sure to protect the P3 IF input with
back to back diodes. Static electricity on the whip antenna can harm the
input pre-amp. (Ask me how I know..)
I made an adapter here with a male-female BNC terminator with the back
to back diodes internally instead of the 50 ohm resistor.
I power the P3 with a 10 cell AA alkaline battery pack to search for RFI.
73,
Eric
elecraft.com
On 5/1/2013 10:10 AM, Merv Schweigert wrote:
Use your P3, put an antenna on the IF port and it will receive
signals on the
freq that you see the interference, power it off a small battery and
walk
around or use a directional antenna to pinpoint the location of the
interference,
P3 will tune the band needed.
One of the uses for the P3 that is overlooked,
Merv K9FD/KH6
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
