I have a question on adjusting the voltage a bit higher for use with the
K3. I was thinking of 14.5 V, as others have mentioned, and adjusting
voltage on receive.
I have an accurate voltmeter.
Should I set the voltage with the voltmeter measuring at the DC input to
the K3 (at the power pole into the radio) or should I use the internal
voltmeter in the K3?
On 4/16/2013 9:05 AM, Mike Reublin wrote:
I've used an Astron RS-35M very happily for years. Had to turn it up a tad for
the K3.
Tip: The voltage adjustment is on the under side of the board......
73, Mike NF4L
On Apr 16, 2013, at 8:03 AM, Tom Branton <[email protected]> wrote:
The K3 in question is a K3/100. Thanks,
Tom
On Apr 16, 2013, at 6:26 AM, "Tom Branton" <[email protected]> wrote:
Good morning everyone ,
I think I have found a very nicely maintained and equipped K3 to purchase. Any
purchase recommendations as to a well constructed and trouble free power supply?
Thanks
Tom
WD5DFE
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
--
73,
Gary K9GS
Greater Milwaukee DX Association: http://www.gmdxa.org
Society of Midwest Contesters: http://www.w9smc.com
CW Ops #1032 http://www.cwops.org
************************************************
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
