Ian,
I agree with your note. Having said that there might be a possibility of yet
another menu setting that would allow different PTT/Inh interaction.
Only designers know what can be easily implemented and what cannot. Separate
lockout box is not a problem for home station. Any extra box when you need
to take rig far away is extra troubles.
73, Igor UA9CDC
----- Original Message -----
From: "Ian White" <[email protected]>
To: <[email protected]>
Sent: Friday, March 29, 2013 2:19 PM
Subject: Re: [Elecraft] K3 lock out via Inhibit
I think it would be easily resolved if K3 firmware is changed so that
Inh
signal disables PTT in at the same time.
Many K3s are used with external sequencers which depend on the PTT/Inh
logic remaining exactly as it is now.
A far better place for specialized lockout logic is in a box between the
two K3s.
73 from Ian GM3SEK
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
