Don,
I do not think so. Inhibit signal does not disable PTT. Therefore when the
first station starts to TX and then the second station presses PTT the first
station TX would get disabled by Inh right in the middle of the
transmission.
I think it would be easily resolved if K3 firmware is changed so that Inh
signal disables PTT in at the same time.
73, Igor UA9CDC
----- Original Message -----
From: "Don Wilhelm" <[email protected]>
To: "Al Lorona" <[email protected]>
Cc: <[email protected]>
Sent: Friday, March 29, 2013 6:38 AM
Subject: Re: [Elecraft] K3 lock out via Inhibit
Al,
It is all in the timing. The first K3 to transmit will get priority. If
both try to transmit at exactly the same time (think milliseconds), then
and only then will both be locked out.
73,
Don W3FPR
On 3/28/2013 7:45 PM, Al Lorona wrote:
I'm curious... how should that condition be resolved? Should the system
randomly
choose one or the other station to transmit, or ...??? If so, then it
will
probably need a microprocessor and it will no longer be a 'simple'
circuit.
Al W6LX
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
