It worked fine for me. The first thing I noticed was what seemed to be faster response time for the noise and signal peaks, which is an improvement.
On Fri, 18 Jan 2013 22:32:17 -0800 (PST), Charlie Delta <[email protected]> wrote: >Hi Paul > >I have had all sorts of problems trying to update to this beta release. > >The upload crashed after the MCU load. I tried several times with no success. >It seems that something gets corrupted after the reset process. >The P3 does actually reset however the update to the P3 Utility seems rather >slow. > >I even tried using the MCU bootloader with the same failure. I have tried >about 6 >times and it has failed on every attempt. I thought that it was the >USB-serial driver that got corrupted. I tried a dedicated RS232 port on >another PC with the same result. >I also disconnected the K3 from the P3 with no success. > >I have successfully loaded the previous beta so I presume that their is no >issue >with my PC setup. This might be some issue with my P3, although its running >fine after re- installing the previous beta. > > Is there something different in this beta release that makes loading > problematic? > >Craig >VK3OD > > >______________________________________________________________ >Elecraft mailing list >Home: http://mailman.qth.net/mailman/listinfo/elecraft >Help: http://mailman.qth.net/mmfaq.htm >Post: mailto:[email protected] > >This list hosted by: http://www.qsl.net >Please help support this email list: http://www.qsl.net/donate.html 73, Tom Amateur Radio Operator N5GE ARRL Lifetime Member QCWA Lifetime Member ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
