I for one hope they will offer an option to blank the vfo B freq display except when tuning.
...bill nr4c Sent from my Verizon Wireless Droid -----Original message----- From: Brian Hunt <[email protected]> To: [email protected] Sent: Wed, Aug 15, 2012 02:40:42 GMT+00:00 Subject: Re: [Elecraft] CW Decode With FW 4.51 installed the CW decode has become problematic. I think Wayne mentioned that it was primarily an AGC issue. With this in mind I've been able to get it to do almost perfect copy of the W1AW slow speed code practice tonight. My technique is to set the Threshold to Auto (HOLD CWT}, carefully tune in the signal to be copied using the CWT marker and then back down on the RF gain until the characters begin to appear. You might have to ride the RF gain control to get consistent copy. I don't know of any way to lock the VFO-B display into "text" mode. Hope this helps ... Brian, K0DTJ ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
