I actually recommend something slightly higher for AGC THR, say 5 to 7. Then adjust the CW decode threshold so that the CWT icon flashes along with the incoming CW.
Lyle and I are planning further improvements, in particular making the CW decode threshold a lot less finicky. 73, Wayne N6KR On Aug 14, 2012, at 8:21 PM, Joe Subich, W4TV wrote: > >> The latest FW [4.51?] has a problem with CW Decode, fixes are coming. > > As Wayne posted some time ago, there is no problem with CW decode *IF* > you set the AGC threshold and slope to values that match the pre 4.51 > defaults. I don't remember what the "compatible" values are since I > prefer the improved receiver performance with the new firmware but I > would start with AGC THR between 2 and 5 and AGC SLP between 12 and 15 > for best decoder performance (but not best receiver performance). ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
