Guys, Thanks for all the replies to my original question below. Had a closer look at what I have and the 'cleaner' is the D100L (Caig). I got them both from a HiFi supplier in the UK in 2ml squeeze tubes...about £5 a throw but it goes a long way!
May have mentioned this before but I use those small interdental brushes to apply the stuff; if you get some of the really small ones you can get inside the header sockets as well. This way just a few microlitres can coat everything... 73, Stewart, GW0ETF GW0ETF wrote > > Due to an ordering misunderstanding I have 2 different Deoxit versions, > standard cleaner and Deoxit Gold. According to the instructions the > cleaner cleans(!) and the Gold is applied post cleaning to prevent any > subsequent oxidation/tarnishing. Wonder which everyone's using..? > > Not had any problems with the PA module on K3 #145 but plenty with the > front panel connections which Deoxit fixes..... > > 73, > > Stewart, GW0ETF > > > > w0mu wrote >> >> I believe you can also purchase a can of deoxit and spray it liberally >> on the pins and connector side and carefully plug and unplug the board a >> few times. >> >> Mike W0MU >> >> W0MU-1 CC Cluster w0mu.net >> >> > -- View this message in context: http://elecraft.365791.n2.nabble.com/Re-K3-12v-ERR-tp7084750p7089124.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
