Thanks, Alan. Appreciate it greatly. Keith
Sent from my iPhone please excuse typos On Dec 10, 2011, at 7:37 PM, "Alan Slusher" <[email protected]> wrote: > The Radio Shack part number for the MOVs is: 276-0568. > Three wires in the outlet strip. Solder an MOV across each pair of the three > wires. > > Alan V31FA > > > ----- Original Message ----- >> If this is the case one would need to open the outlet box and replace the >> "exploded" MOVs. >> Or purchase a new outlet strip, open it up, and install an MOV across each >> pair of wires (three in all). Try Radio Shack. >> >> Cheers, >> >> Alan V31FA >> >> ----- Original Message ----- From: "Jim Wiley" <[email protected]> >> To: "Keith Heimbold" <[email protected]> >> Cc: <[email protected]> >> Sent: Saturday, December 10, 2011 8:02 PM >> Subject: Re: [Elecraft] Shack equipment noise >> >> >>> May not have been your radio at all, but instead might have been a >>> "surge protected" multiple AC outlet box. I have a few Tripp-Lite >>> "Isobar" outlet boxes, and if they "catch" a surge, they will make a >>> VERY loud bang! Fooled me for a while until I figured out what was >>> happening. Sounds like some has let off a .22 rifle shot under the >>> operating bench. Dissipating the energy from a big surge take some >>> doing, and the result is often a very loud bang. Might that have been >>> what you heard? >>> >>> > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
