The Radio Shack part number for the MOVs is: 276-0568. Three wires in the outlet strip. Solder an MOV across each pair of the three wires.
Alan V31FA ----- Original Message ----- > If this is the case one would need to open the outlet box and replace the > "exploded" MOVs. > Or purchase a new outlet strip, open it up, and install an MOV across each > pair of wires (three in all). Try Radio Shack. > > Cheers, > > Alan V31FA > > ----- Original Message ----- > From: "Jim Wiley" <[email protected]> > To: "Keith Heimbold" <[email protected]> > Cc: <[email protected]> > Sent: Saturday, December 10, 2011 8:02 PM > Subject: Re: [Elecraft] Shack equipment noise > > >> May not have been your radio at all, but instead might have been a >> "surge protected" multiple AC outlet box. I have a few Tripp-Lite >> "Isobar" outlet boxes, and if they "catch" a surge, they will make a >> VERY loud bang! Fooled me for a while until I figured out what was >> happening. Sounds like some has let off a .22 rifle shot under the >> operating bench. Dissipating the energy from a big surge take some >> doing, and the result is often a very loud bang. Might that have been >> what you heard? >> >> ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
