In the main Config Menu > Mic Sel, I plug the mic into the front panel and use FP-H and no bias. Mic gain 18-20. Unless you have an Icom cartridge in the Pro-Set. That would require bias.
Buck k4ia K3 # 101 On 11/26/2011 4:35 PM, Jack Berry wrote: > I have a Pro-Set mic that came with the purchase of a used K3, s/n #3012 for > reference. The mic seems to be nearly dead and I wanted to make sure that I > am > not doing something wrong before sending it to Heil for testing and repair. > > Even with the gain full up and the mic right next to my mouth I can't move > the > ALC but do hear my voice in the head set with monitor volume up full. I have > tried it through both the front and rear mic sockets and another Heil mic > works > fine with the radio. > > Any suggestions? > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
