I wonder if those of us not under FCC regulation could purchase an international version of the amp. I'd love to see 800 watts out from the amp with the QRP version of the K2 running at 10-15 watts. Perhaps even a lower priced version without SO2R capabilities...
On May 23, 2005 09:55 am, George Cortez wrote: > he had it driving @ about 36 watts to get about 1200 watts out at the > time..... > Just to show what she'll do..... It will require 50 watts for 800 when > it is released > The poor dummy load was only a 500 watter and it was HOT! > > George NE2I > > Tom Hammond wrote: > > K2/100! > > > > According to the FCC, FCC rules dictate no more than 13dB of gain from > > an external amplifier. As a result, the K2/100 will be required for > > full output from the proposed QRO amp, which will require about 50W to > > fully drive it. > > > > Tom N0SS > > > > At 02:58 PM 5/22/05, [EMAIL PROTECTED] wrote: > >> Was it a K2?.....or a 100 watt K2/100? > >> > >> Rich K2CPE > >> K2 #1102 > >> > >> >It was driven with about 30-40W from a K2................. > >> -- Darrell Bellerive Amateur Radio Stations: VA7TO, VE7CLA Grand Forks, British Columbia, Canada _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
