he had it driving @ about 36 watts to get about 1200 watts out at the
time.....
Just to show what she'll do..... It will require 50 watts for 800 when
it is released
The poor dummy load was only a 500 watter and it was HOT!
George NE2I
Tom Hammond wrote:
K2/100!
According to the FCC, FCC rules dictate no more than 13dB of gain from
an external amplifier. As a result, the K2/100 will be required for
full output from the proposed QRO amp, which will require about 50W to
fully drive it.
Tom N0SS
At 02:58 PM 5/22/05, [EMAIL PROTECTED] wrote:
Was it a K2?.....or a 100 watt K2/100?
Rich K2CPE
K2 #1102
>It was driven with about 30-40W from a K2.................
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
