What codec is being used for audio ? Le lundi 12 janvier 2009 à 17:29 -0700, Joseph Comfort a écrit : > Yes, I use H.323. I have used it through many versions of gnomemeeting > and into ekiga. I know very little about SIP mainly because, when I > start to read about it, it seems unsuitable for my needs. I'd rather > not learn, but instead use a standard that has always worked. > > > Damien Sandras wrote: > >> I can connect fine with H323 direct to the IP address of the MCU at the > >> videoconference location. Normally, if there is no one at the other > >> end, I get a message about "You are the first participant." I do not > >> get that with the 11.1 system. Video is being transmitted at a good > >> rate (a default view as no webcam is attached). But there is no sound > >> transmission to or from the MCU. I disabled pulseaudio by renaming the > >> binary file (and rebooting). I still had the system sounds, but no > >> change with ekiga. > >> > >> Maybe the solution is easy, but I have not found it by trials, scanning > >> mailing lists, etc. Your help would be appreciated. > > > > Using H.323 ? > > Joe Comfort > _______________________________________________ > ekiga-list mailing list > [email protected] > http://mail.gnome.org/mailman/listinfo/ekiga-list -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ Be IP : http://www.beip.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:[email protected]
_______________________________________________ ekiga-list mailing list [email protected] http://mail.gnome.org/mailman/listinfo/ekiga-list
