Le lundi 12 janvier 2009 à 14:15 -0700, Joseph Comfort a écrit : > I have 3 computers with different architectures running SuSE 10.3. > Ekiga v2.0.9 works fine on them. > > I have 2 computers with different architectures running SuSE 11.1. The > sound does not work with them. Two computers, one from each group, have > identical architectures. They are both dual Opterons 244, with AMD8111 > audio chips. The system sounds are heard fine. The firewalls are off. > The kmix settings are the same. The ekiga settings are the same. I am > using KDE 3.5 on both systems. I do not see any sound error messages in > the system log files. > > I can connect fine with H323 direct to the IP address of the MCU at the > videoconference location. Normally, if there is no one at the other > end, I get a message about "You are the first participant." I do not > get that with the 11.1 system. Video is being transmitted at a good > rate (a default view as no webcam is attached). But there is no sound > transmission to or from the MCU. I disabled pulseaudio by renaming the > binary file (and rebooting). I still had the system sounds, but no > change with ekiga. > > Maybe the solution is easy, but I have not found it by trials, scanning > mailing lists, etc. Your help would be appreciated.
Using H.323 ? -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ Be IP : http://www.beip.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:[email protected] _______________________________________________ ekiga-list mailing list [email protected] http://mail.gnome.org/mailman/listinfo/ekiga-list
