On 1/10/26 16:27, Marek Vasut wrote:
The connector type for the DataImage SCF0700C48GGU18 panel is missing and
devm_drm_panel_bridge_add() requires connector type to be set. This leads
to a warning and a backtrace in the kernel log and panel does not work:
"
WARNING: CPU: 3 PID: 38 at drivers/gpu/drm/bridge/panel.c:379
devm_drm_of_get_bridge+0xac/0xb8
"
The warning is triggered by a check for valid connector type in
devm_drm_panel_bridge_add(). If there is no valid connector type
set for a panel, the warning is printed and panel is not added.
Fill in the missing connector type to fix the warning and make
the panel operational once again.
Cc: [email protected]
Fixes: 97ceb1fb08b6 ("drm/panel: simple: Add support for DataImage
SCF0700C48GGU18")
Signed-off-by: Marek Vasut <[email protected]>
---
Cc: David Airlie <[email protected]>
Cc: Jessica Zhang <[email protected]>
Cc: Maarten Lankhorst <[email protected]>
Cc: Maxime Ripard <[email protected]>
Cc: Neil Armstrong <[email protected]>
Cc: Simona Vetter <[email protected]>
Cc: Thomas Zimmermann <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
---
drivers/gpu/drm/panel/panel-simple.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/gpu/drm/panel/panel-simple.c
b/drivers/gpu/drm/panel/panel-simple.c
index 3acc9f3dac16a..e33ee2308e715 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -1900,6 +1900,7 @@ static const struct panel_desc dataimage_scf0700c48ggu18
= {
},
.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
.bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE,
+ .connector_type = DRM_MODE_CONNECTOR_DPI,
};
static const struct display_timing dlc_dlc0700yzg_1_timing = {
Reviewed-by: Neil Armstrong <[email protected]>
Thanks,
Neil
