The connector type for the DataImage SCF0700C48GGU18 panel is missing and devm_drm_panel_bridge_add() requires connector type to be set. This leads to a warning and a backtrace in the kernel log and panel does not work: " WARNING: CPU: 3 PID: 38 at drivers/gpu/drm/bridge/panel.c:379 devm_drm_of_get_bridge+0xac/0xb8 " The warning is triggered by a check for valid connector type in devm_drm_panel_bridge_add(). If there is no valid connector type set for a panel, the warning is printed and panel is not added. Fill in the missing connector type to fix the warning and make the panel operational once again.
Cc: [email protected] Fixes: 97ceb1fb08b6 ("drm/panel: simple: Add support for DataImage SCF0700C48GGU18") Signed-off-by: Marek Vasut <[email protected]> --- Cc: David Airlie <[email protected]> Cc: Jessica Zhang <[email protected]> Cc: Maarten Lankhorst <[email protected]> Cc: Maxime Ripard <[email protected]> Cc: Neil Armstrong <[email protected]> Cc: Simona Vetter <[email protected]> Cc: Thomas Zimmermann <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] --- drivers/gpu/drm/panel/panel-simple.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c index 3acc9f3dac16a..e33ee2308e715 100644 --- a/drivers/gpu/drm/panel/panel-simple.c +++ b/drivers/gpu/drm/panel/panel-simple.c @@ -1900,6 +1900,7 @@ static const struct panel_desc dataimage_scf0700c48ggu18 = { }, .bus_format = MEDIA_BUS_FMT_RGB888_1X24, .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE, + .connector_type = DRM_MODE_CONNECTOR_DPI, }; static const struct display_timing dlc_dlc0700yzg_1_timing = { -- 2.51.0
