From: Ilpo Järvinen <ilpo.jarvi...@linux.intel.com> Resizing BAR to a larger size has to release upstream bridge windows in order make the bridge windows larger as well (and to potential relocate them into a larger free block within iomem space). Some GPUs have an integrated PCI switch that has BAR0. The resource allocation assigns space for that BAR0 as it does for any resource.
An extra resource on a bridge will pin its upstream bridge window in place which prevents BAR resize for anything beneath that bridge. Nothing in the pcieport driver provided by PCI core, which typically is the driver bound to these bridges, requires that BAR0. Because of that, releasing the extra BAR does not seem to have notable downsides but comes with a clear upside. Therefore, release BAR0 of such switches using a quirk and clear its flags to prevent any new invocation of the resource assignment algorithm from assigning the resource again. Due to other siblings within the PCI hierarchy of all the devices integrated into the GPU, some other devices may still have to be manually removed before the resize is free of any bridge window pins. Such siblings can be released through sysfs to unpin windows while leaving access to GPU's sysfs entries required for initiating the resize operation, whereas removing the topmost bridge this quirk targets would result in removing the GPU device as well so no manual workaround for this problem exists. Reported-by: Lucas De Marchi <lucas.demar...@intel.com> Cc: <sta...@vger.kernel.org> # 6.12+ Link: https://lore.kernel.org/linux-pci/fl6tx5ztvttg7txmz2ps7oyd745wg3lwcp3h7esmvnyg26n44y@owo2ojiu2mov/ Signed-off-by: Ilpo Järvinen <ilpo.jarvi...@linux.intel.com> Signed-off-by: Lucas De Marchi <lucas.demar...@intel.com> --- drivers/pci/quirks.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index d97335a401930..98a4f0a1285be 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -6338,3 +6338,23 @@ static void pci_mask_replay_timer_timeout(struct pci_dev *pdev) DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_GLI, 0x9750, pci_mask_replay_timer_timeout); DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_GLI, 0x9755, pci_mask_replay_timer_timeout); #endif + +/* + * PCI switches integrated into some GPUs have BAR0 that prevents resizing + * the BARs of the GPU device due to that bridge BAR0 pinning the bridge + * window it's under in place. Nothing in pcieport requires that BAR0. + * + * Release and disable BAR0 permanently by clearing its flags to prevent + * anything from assigning it again. + */ +static void pci_release_bar0(struct pci_dev *pdev) +{ + struct resource *res = pci_resource_n(pdev, 0); + + if (!res->parent) + return; + + pci_release_resource(pdev, 0); + res->flags = 0; +} +DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_INTEL, 0xe2ff, pci_release_bar0); -- 2.50.1
