Re: [PATCH v1 1/2] This patch adds a new device tree binding documentation.

[Dmitry Baryshkov]

On Wed, Sep 03, 2025 at 05:38:24AM -0700, syyang wrote:
> - New device tree binding documentation at
>   Documentation/devicetree/bindings/display/bridge/lontium,lt9611c.yaml
> 
> Signed-off-by: syyang <syy...@lontium.com>

Please fix your Git setup and use your full name in SoB tag and author
metadata.

> ---
>  .../display/bridge/lontium,lt9611c.yaml       | 123 ++++++++++++++++++
>  1 file changed, 123 insertions(+)
>  create mode 100644 
> Documentation/devicetree/bindings/display/bridge/lontium,lt9611c.yaml
> 
> diff --git 
> a/Documentation/devicetree/bindings/display/bridge/lontium,lt9611c.yaml 
> b/Documentation/devicetree/bindings/display/bridge/lontium,lt9611c.yaml
> new file mode 100644
> index 000000000000..e8f204c71a95
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/bridge/lontium,lt9611c.yaml
> @@ -0,0 +1,123 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/bridge/lontium,lt9611.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Lontium LT9611C 2 Port MIPI to HDMI Bridge
> +
> +maintainers:
> +  - Rob Herring <r...@kernel.org>

Are you sure?

> +
> +description: |
> +  The LT9611C are bridge devices which convert DSI to HDMI

Can't you extend the existing lontium,lt9611.yaml?

> +
> +properties:
> +  compatible:
> +    enum:
> +      - lontium,lt9611c
> +      - lontium,lt9611uxd



> +
> +  reg:
> +    maxItems: 1
> +
> +  "#sound-dai-cells":
> +    const: 0
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  reset-gpios:
> +    maxItems: 1
> +    description: GPIO connected to active high RESET pin.
> +
> +  vdd-supply:
> +    description: Regulator for 1.2V MIPI phy power.
> +
> +  vcc-supply:
> +    description: Regulator for 3.3V IO power.
> +
> +  ports:
> +    $ref: /schemas/graph.yaml#/properties/ports
> +
> +    properties:
> +      port@0:
> +        $ref: /schemas/graph.yaml#/properties/port
> +        description:
> +          Primary MIPI port-1 for MIPI input
> +
> +      port@1:
> +        $ref: /schemas/graph.yaml#/properties/port
> +        description:
> +          Additional MIPI port-2 for MIPI input, used in combination
> +          with primary MIPI port-1 to drive higher resolution displays
> +
> +      port@2:
> +        $ref: /schemas/graph.yaml#/properties/port
> +        description:
> +          HDMI port for HDMI output
> +
> +    required:
> +      - port@0
> +      - port@2

All of this totally looks like lontium,lt9611.yaml, except the
vdd-supply voltage difference.

> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - vdd-supply
> +  - vcc-supply
> +  - ports
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/gpio/gpio.h>
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +
> +    i2c10 {
> +      #address-cells = <1>;
> +      #size-cells = <0>;
> +
> +      hdmi-bridge@41 {
> +        compatible = "lontium,lt9611c";
> +        reg = <0x41>;
> +        #sound-dai-cells = <0>;
> +        interrupts-extended = <&pio 128 GPIO_ACTIVE_HIGH>;
> +        reset-gpios = <&pio 127 GPIO_ACTIVE_HIGH>;
> +        vdd-supply = <&lt9611_1v2>;
> +        vcc-supply = <&lt9611_3v3>;
> +        dsi-lanes = <4>;
> +        status = "okay";
> +
> +        ports {
> +          #address-cells = <1>;
> +          #size-cells = <0>;
> +
> +          port@0 {
> +            reg = <0>;
> +            lt9611_a: endpoint {
> +              remote-endpoint = <&dsi0_out>;
> +            };
> +          };
> +
> +          port@1 {
> +            reg = <1>;
> +            lt9611_b: endpoint {
> +              remote-endpoint = <&dsi1_out>;
> +            };
> +          };
> +
> +          port@2 {
> +            reg = <2>;
> +            lt9611_out: endpoint {
> +              remote-endpoint = <&hdmi_con>;
> +            };
> +          };
> +        };
> +      };
> +    };
> +
> +...
> +
> -- 
> 2.25.1
> 

-- 
With best wishes
Dmitry