On Wed, 03 Sep 2025 05:38:24 -0700, syyang wrote: > - New device tree binding documentation at > Documentation/devicetree/bindings/display/bridge/lontium,lt9611c.yaml > > Signed-off-by: syyang <syy...@lontium.com> > --- > .../display/bridge/lontium,lt9611c.yaml | 123 ++++++++++++++++++ > 1 file changed, 123 insertions(+) > create mode 100644 > Documentation/devicetree/bindings/display/bridge/lontium,lt9611c.yaml >
My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/bridge/lontium,lt9611c.yaml: warning: ignoring duplicate '$id' value 'http://devicetree.org/schemas/display/bridge/lontium,lt9611.yaml#' /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/bridge/lontium,lt9611c.yaml: $id: Cannot determine base path from $id, relative path/filename doesn't match actual path or filename $id: http://devicetree.org/schemas/display/bridge/lontium,lt9611.yaml file: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/bridge/lontium,lt9611c.yaml Documentation/devicetree/bindings/display/bridge/lontium,lt9611c.example.dtb: /example-0/i2c10/hdmi-bridge@41: failed to match any schema with compatible: ['lontium,lt9611c'] doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20250903123825.1721443-2-syy...@lontium.com The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
