On Wed, Sep 03, 2025 at 04:43:57PM +0530, Harikrishna Shenoy wrote: > From: Swapnil Jakhade <sjakh...@cadence.com> > > Add binding changes for DSC(Display Stream Compression) in the MHDP8546 > DPI/DP bridge. > > Signed-off-by: Swapnil Jakhade <sjakh...@cadence.com> > Signed-off-by: Harikrishna Shenoy <h-she...@ti.com> > --- > .../bindings/display/bridge/cdns,mhdp8546.yaml | 11 +++++++---- > 1 file changed, 7 insertions(+), 4 deletions(-) > > diff --git > a/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8546.yaml > b/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8546.yaml > index c2b369456e4e..6e749c002669 100644 > --- a/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8546.yaml > +++ b/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8546.yaml > @@ -27,6 +27,8 @@ properties: > Register block for DSS_EDP0_INTG_CFG_VP registers in case of TI J7 > SoCs. > - description: > Register block of mhdptx sapb registers. > + - description: > + Register block for mhdptx DSC encoder registers. > > reg-names: > minItems: 1 > @@ -34,6 +36,7 @@ properties: > - const: mhdptx > - const: j721e-intg > - const: mhdptx-sapb > + - const: mhdptx-dsc
'mhdptx' is redundant. Don't continue that pattern. Just 'dsc'. > > clocks: > maxItems: 1 > @@ -100,18 +103,18 @@ allOf: > properties: > reg: > minItems: 2 > - maxItems: 3 > + maxItems: 4 > reg-names: > minItems: 2 > - maxItems: 3 > + maxItems: 4 > else: > properties: > reg: > minItems: 1 > - maxItems: 2 > + maxItems: 3 > reg-names: > minItems: 1 > - maxItems: 2 > + maxItems: 3 Have you tested this works? While it might work for TI with the j721e-intg registers in the middle, it won't work for platforms without them. You're going to have to have 2 lists of reg-names. Rob
