On Sat, Jul 19, 2025 at 12:25 AM Frank Li <frank...@nxp.com> wrote:
>
> On Fri, Jul 18, 2025 at 06:11:49PM +0800, Shengjiu Wang wrote:
>
> Subject needn't said binding again.
>
> dt-bindings: display: imx: add HDMI PAI for i.MX8MP
>
> > Add binding for the i.MX8MP HDMI parallel Audio interface block.
>
> Need empty line between two paragraph
Ok.
>
> > As this port is linked to imx8mp-hdmi-tx, add port@2 in
> > fsl,imx8mp-hdmi-tx.yaml document.
>
> In fsl,imx8mp-hdmi-tx.yaml, add port@2 that linked to imx8mp-hdmi-tx (
> look like pai_to_hdmi_tx?)
yes, linked to pai_to_hdmi_tx.
>
> >
> > Signed-off-by: Shengjiu Wang <shengjiu.w...@nxp.com>
> > ---
> > .../display/bridge/fsl,imx8mp-hdmi-tx.yaml | 13 ++++
> > .../display/imx/fsl,imx8mp-hdmi-pai.yaml | 61 +++++++++++++++++++
> > 2 files changed, 74 insertions(+)
> > create mode 100644
> > Documentation/devicetree/bindings/display/imx/fsl,imx8mp-hdmi-pai.yaml
> >
> > diff --git
> > a/Documentation/devicetree/bindings/display/bridge/fsl,imx8mp-hdmi-tx.yaml
> > b/Documentation/devicetree/bindings/display/bridge/fsl,imx8mp-hdmi-tx.yaml
> > index 05442d437755..cf810b277557 100644
> > ---
> > a/Documentation/devicetree/bindings/display/bridge/fsl,imx8mp-hdmi-tx.yaml
> > +++
> > b/Documentation/devicetree/bindings/display/bridge/fsl,imx8mp-hdmi-tx.yaml
> > @@ -49,9 +49,14 @@ properties:
> > $ref: /schemas/graph.yaml#/properties/port
> > description: HDMI output port
> >
> > + port@2:
> > + $ref: /schemas/graph.yaml#/properties/port
> > + description: Parallel audio input port
> > +
> > required:
> > - port@0
> > - port@1
> > + - port@2
>
> Are you sure it is required? It may cause may dtb check warning.
yes, it is required.
>
> >
> > required:
> > - compatible
> > @@ -98,5 +103,13 @@ examples:
> > remote-endpoint = <&hdmi0_con>;
> > };
> > };
> > +
> > + port@2 {
> > + reg = <2>;
> > +
> > + endpoint {
> > + remote-endpoint = <&pai_to_hdmi_tx>;
> > + };
> > + };
> > };
> > };
> > diff --git
> > a/Documentation/devicetree/bindings/display/imx/fsl,imx8mp-hdmi-pai.yaml
> > b/Documentation/devicetree/bindings/display/imx/fsl,imx8mp-hdmi-pai.yaml
> > new file mode 100644
> > index 000000000000..d2d723935032
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/display/imx/fsl,imx8mp-hdmi-pai.yaml
> > @@ -0,0 +1,61 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/display/imx/fsl,imx8mp-hdmi-pai.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Freescale i.MX8MP HDMI Parallel Audio Interface
> > +
> > +maintainers:
> > + - Shengjiu Wang <shengjiu.w...@nxp.com>
> > +
> > +description:
> > + The HDMI TX Parallel Audio Interface (HTX_PAI) is a digital module that
> > acts as the
> > + bridge between the Audio Subsystem to the HDMI TX Controller.
>
> remove "a digital module that acts as the"
Ok, will update it in the next version.
best regards
Shengjiu Wang
>
> Frank
>
> > +
> > +properties:
> > + compatible:
> > + const: fsl,imx8mp-hdmi-pai
> > +
> > + reg:
> > + maxItems: 1
> > +
> > + interrupts:
> > + maxItems: 1
> > +
> > + power-domains:
> > + maxItems: 1
> > +
> > + port:
> > + $ref: /schemas/graph.yaml#/properties/port
> > + description: Output to the HDMI TX controller.
> > + unevaluatedProperties: false
> > +
> > +required:
> > + - compatible
> > + - reg
> > + - interrupts
> > + - power-domains
> > + - port
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > + - |
> > + #include <dt-bindings/interrupt-controller/irq.h>
> > + #include <dt-bindings/power/imx8mp-power.h>
> > +
> > + hdmi@32fc4800 {
> > + compatible = "fsl,imx8mp-hdmi-pai";
> > + reg = <0x32fc4800 0x800>;
> > + interrupt-parent = <&irqsteer_hdmi>;
> > + interrupts = <14>;
> > + power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_PAI>;
> > +
> > + port {
> > +
> > + pai_to_hdmi_tx: endpoint {
> > + remote-endpoint = <&hdmi_tx_from_pai>;
> > + };
> > + };
> > + };
> > --
> > 2.34.1
> >
