On Fri, Jul 18, 2025 at 06:11:49PM +0800, Shengjiu Wang wrote:
Subject needn't said binding again.
dt-bindings: display: imx: add HDMI PAI for i.MX8MP
> Add binding for the i.MX8MP HDMI parallel Audio interface block.
Need empty line between two paragraph
> As this port is linked to imx8mp-hdmi-tx, add port@2 in
> fsl,imx8mp-hdmi-tx.yaml document.
In fsl,imx8mp-hdmi-tx.yaml, add port@2 that linked to imx8mp-hdmi-tx (
look like pai_to_hdmi_tx?)
>
> Signed-off-by: Shengjiu Wang <shengjiu.w...@nxp.com>
> ---
> .../display/bridge/fsl,imx8mp-hdmi-tx.yaml | 13 ++++
> .../display/imx/fsl,imx8mp-hdmi-pai.yaml | 61 +++++++++++++++++++
> 2 files changed, 74 insertions(+)
> create mode 100644
> Documentation/devicetree/bindings/display/imx/fsl,imx8mp-hdmi-pai.yaml
>
> diff --git
> a/Documentation/devicetree/bindings/display/bridge/fsl,imx8mp-hdmi-tx.yaml
> b/Documentation/devicetree/bindings/display/bridge/fsl,imx8mp-hdmi-tx.yaml
> index 05442d437755..cf810b277557 100644
> --- a/Documentation/devicetree/bindings/display/bridge/fsl,imx8mp-hdmi-tx.yaml
> +++ b/Documentation/devicetree/bindings/display/bridge/fsl,imx8mp-hdmi-tx.yaml
> @@ -49,9 +49,14 @@ properties:
> $ref: /schemas/graph.yaml#/properties/port
> description: HDMI output port
>
> + port@2:
> + $ref: /schemas/graph.yaml#/properties/port
> + description: Parallel audio input port
> +
> required:
> - port@0
> - port@1
> + - port@2
Are you sure it is required? It may cause may dtb check warning.
>
> required:
> - compatible
> @@ -98,5 +103,13 @@ examples:
> remote-endpoint = <&hdmi0_con>;
> };
> };
> +
> + port@2 {
> + reg = <2>;
> +
> + endpoint {
> + remote-endpoint = <&pai_to_hdmi_tx>;
> + };
> + };
> };
> };
> diff --git
> a/Documentation/devicetree/bindings/display/imx/fsl,imx8mp-hdmi-pai.yaml
> b/Documentation/devicetree/bindings/display/imx/fsl,imx8mp-hdmi-pai.yaml
> new file mode 100644
> index 000000000000..d2d723935032
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/imx/fsl,imx8mp-hdmi-pai.yaml
> @@ -0,0 +1,61 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/imx/fsl,imx8mp-hdmi-pai.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Freescale i.MX8MP HDMI Parallel Audio Interface
> +
> +maintainers:
> + - Shengjiu Wang <shengjiu.w...@nxp.com>
> +
> +description:
> + The HDMI TX Parallel Audio Interface (HTX_PAI) is a digital module that
> acts as the
> + bridge between the Audio Subsystem to the HDMI TX Controller.
remove "a digital module that acts as the"
Frank
> +
> +properties:
> + compatible:
> + const: fsl,imx8mp-hdmi-pai
> +
> + reg:
> + maxItems: 1
> +
> + interrupts:
> + maxItems: 1
> +
> + power-domains:
> + maxItems: 1
> +
> + port:
> + $ref: /schemas/graph.yaml#/properties/port
> + description: Output to the HDMI TX controller.
> + unevaluatedProperties: false
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> + - power-domains
> + - port
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/irq.h>
> + #include <dt-bindings/power/imx8mp-power.h>
> +
> + hdmi@32fc4800 {
> + compatible = "fsl,imx8mp-hdmi-pai";
> + reg = <0x32fc4800 0x800>;
> + interrupt-parent = <&irqsteer_hdmi>;
> + interrupts = <14>;
> + power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_PAI>;
> +
> + port {
> +
> + pai_to_hdmi_tx: endpoint {
> + remote-endpoint = <&hdmi_tx_from_pai>;
> + };
> + };
> + };
> --
> 2.34.1
>
