On 4/21/25 10:18 PM, Barnabás Czémán wrote:
> From: Dang Huynh <danc...@riseup.net>
> 
> Add initial support for MSM8937 SoC.
> 
> Signed-off-by: Dang Huynh <danc...@riseup.net>
> Co-developed-by: Barnabás Czémán <barnabas.cze...@mainlining.org>
> Signed-off-by: Barnabás Czémán <barnabas.cze...@mainlining.org>
> ---

[...]

> +                     tsens_base1: base1@1d8 {
> +                             reg = <0x1d8 1>;

The size part should be hex too

[...]

> +                             wcss-wlan2-pins {
> +                                     pins = "gpio76";
> +                                     function = "wcss_wlan2";
> +                                     drive-strength = <6>;
> +                                     bias-pull-up;
> +
> +                             };
> +
> +                     };

random newline /\

[...]

> +             mdss: display-subsystem@1a00000 {
> +                     compatible = "qcom,mdss";
> +                     reg = <0x01a00000 0x1000>,
> +                           <0x01ab0000 0x1040>;

The latter region is 0x3000-long

> +                     reg-names = "mdss_phys", "vbif_phys";

Please make reg-names a vertical list too

[...]


> +             gpu: gpu@1c00000 {
> +                     compatible = "qcom,adreno-505.0", "qcom,adreno";
> +                     reg = <0x1c00000 0x40000>;

Please pad the address part to 8 hex digits

[...]

> +                     gpu_opp_table: opp-table {
> +                             compatible = "operating-points-v2";
> +
> +                             opp-19200000 {
> +                                     opp-hz = /bits/ 64 <19200000>;
> +                                     opp-supported-hw = <0xff>;

The comment from the previous revision still stands

Konrad

Reply via email to