On Thu, 27 Mar 2025 16:21:16 +0200 Tomi Valkeinen <tomi.valkei...@ideasonboard.com> wrote:
> Hi,
>
> On 27/03/2025 11:20, Pekka Paalanen wrote:
> > On Wed, 26 Mar 2025 15:55:18 +0200
> > Tomi Valkeinen <tomi.valkei...@ideasonboard.com> wrote:
> >
> >> Hi,
> >>
> >> On 26/03/2025 15:52, Geert Uytterhoeven wrote:
> >>> Hi Tomi,
> >>>
> >>> On Wed, 26 Mar 2025 at 14:23, Tomi Valkeinen
> >>> <tomi.valkei...@ideasonboard.com> wrote:
> >>>> Add greyscale Y8 format.
> >>>>
> >>>> Acked-by: Dmitry Baryshkov <dmitry.barysh...@linaro.org>
> >>>> Signed-off-by: Tomi Valkeinen <tomi.valkei...@ideasonboard.com>
> >>>
> >>> Thanks for your patch!
> >>>
> >>>> --- a/include/uapi/drm/drm_fourcc.h
> >>>> +++ b/include/uapi/drm/drm_fourcc.h
> >>>> @@ -405,6 +405,9 @@ extern "C" {
> >>>> #define DRM_FORMAT_YUV444 fourcc_code('Y', 'U', '2', '4') /*
> >>>> non-subsampled Cb (1) and Cr (2) planes */
> >>>> #define DRM_FORMAT_YVU444 fourcc_code('Y', 'V', '2', '4') /*
> >>>> non-subsampled Cr (1) and Cb (2) planes */
> >>>>
> >>>> +/* Greyscale formats */
> >>>> +
> >>>> +#define DRM_FORMAT_Y8 fourcc_code('G', 'R', 'E', 'Y') /*
> >>>> 8-bit Y-only */
> >>>
> >>> This format differs from e.g. DRM_FORMAT_R8, which encodes
> >>> the number of bits in the FOURCC format. What do you envision
> >>> for e.g. DRM_FORMAT_Y16? fourcc_code('G', 'R', '1', '6')?
> >>
> >> I wanted to use the same fourcc as on V4L2 side. Strictly speaking it's
> >> not required, but different fourccs for the same formats do confuse.
> >>
> >> So, generally speaking, I'd pick an existing fourcc from v4l2 side if
> >> possible, and if not, invent a new one.
> >
> > Hi Tomi,
> >
> > what's the actual difference between DRM_FORMAT_R8 and DRM_FORMAT_Y8?
> >
> > Is the difference that when R8 gets expanded to RGB, it becomes (R, 0,
> > 0), but Y8 gets expanded to (c1 * Y, c2 * Y, c3 * Y) where c1..c3 are
> > defined by MatrixCoefficients (H.273 terminology)?
> >
> > That would be my intuitive assumption following how YCbCr is handled.
> > Is it obvious enough, or should there be a comment to that effect?
>
> You raise an interesting point. Is it defined how a display driver, that
> supports R8 as a format, shows R8 on screen? I came into this in the
> context of grayscale formats, so I thought R8 would be handled as (R, R,
> R) in RGB. But you say (R, 0, 0), which... also makes sense.
That is a good question too. I based my assumption on OpenGL behavior
of R8.
Single channel displays do exist I believe, but being single-channel,
expansion on the other channels is likely meaningless. Hm, but for the
KMS color pipeline, it would be meaningful, like with a CTM.
Interesting.
I don't know. Maybe Geert does?
> I think that's a new argument in favor of Y8: Y8 means Y-only, so the
> meaning is more explicit.
>
> How I see that the display controller would deal with Y8 (depending on
> the HW):
>
> - Take the Y value as a greyscale value, if the HW supports greyscale
> format directly.
> - Use the Y as YCbCr (Y, Cb-neutral, Cr-neutral), and use that if the HW
> supports YCbCr directly.
> - Use the Y as YCbCr as above, and convert to RGB in the usual way.
>
> And as it's an YUV format, the limited/full range applies, which I
> believe is not usually applied to RGB formats.
>
> Does this make sense?
It makes perfect sense to me.
The KMS color pipeline is defined in terms of full-range RGB, so if any
of those KMS properties is set that might make a difference, the driver
is forced to go through RGB, regardless of the hardware signal format.
Thanks,
pq
pgpfXwRRAezGI.pgp
Description: OpenPGP digital signature
