Currently, SSPPs are assigned to a maximum of two pipes. However,
quad-pipe usage scenarios require four pipes and involve configuring
two stages. In quad-pipe case, the first two pipes share a set of
mixer configurations and enable multi-rect mode when certain
conditions are met. The same applies to the subsequent two pipes.

Assign SSPPs to the pipes in each stage using a unified method and
to loop the stages accordingly.

Signed-off-by: Jun Nie <jun....@linaro.org>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c | 63 +++++++++++++++++++------------
 1 file changed, 39 insertions(+), 24 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c 
b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
index 
d67f2ad20b4754ca4bcb759a65a39628b7236b0f..b87da2bd20861370e7b3b1fa60a689a145c2fab7
 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
@@ -1115,8 +1115,9 @@ static int dpu_plane_virtual_assign_resources(struct 
drm_crtc *crtc,
        struct dpu_sw_pipe *r_pipe;
        struct dpu_sw_pipe_cfg *pipe_cfg;
        struct dpu_sw_pipe_cfg *r_pipe_cfg;
+       struct dpu_plane *pdpu = to_dpu_plane(plane);
        const struct msm_format *fmt;
-       int i;
+       int i, num_lm, stage_id, num_stages;
 
        if (plane_state->crtc)
                crtc_state = drm_atomic_get_new_crtc_state(state,
@@ -1124,11 +1125,6 @@ static int dpu_plane_virtual_assign_resources(struct 
drm_crtc *crtc,
 
        pstate = to_dpu_plane_state(plane_state);
 
-       pipe = &pstate->pipe[0];
-       r_pipe = &pstate->pipe[1];
-       pipe_cfg = &pstate->pipe_cfg[0];
-       r_pipe_cfg = &pstate->pipe_cfg[1];
-
        for (i = 0; i < PIPES_PER_PLANE; i++)
                pstate->pipe[i].sspp = NULL;
 
@@ -1142,24 +1138,43 @@ static int dpu_plane_virtual_assign_resources(struct 
drm_crtc *crtc,
 
        reqs.rot90 = drm_rotation_90_or_270(plane_state->rotation);
 
-       pipe->sspp = dpu_rm_reserve_sspp(&dpu_kms->rm, global_state, crtc, 
&reqs);
-       if (!pipe->sspp)
-               return -ENODEV;
-
-       if (!dpu_plane_try_multirect_parallel(pipe, pipe_cfg, r_pipe, 
r_pipe_cfg,
-                                             pipe->sspp,
-                                             
msm_framebuffer_format(plane_state->fb),
-                                             
dpu_kms->catalog->caps->max_linewidth)) {
-               /* multirect is not possible, use two SSPP blocks */
-               r_pipe->sspp = dpu_rm_reserve_sspp(&dpu_kms->rm, global_state, 
crtc, &reqs);
-               if (!r_pipe->sspp)
-                       return -ENODEV;
-
-               pipe->multirect_index = DPU_SSPP_RECT_SOLO;
-               pipe->multirect_mode = DPU_SSPP_MULTIRECT_NONE;
-
-               r_pipe->multirect_index = DPU_SSPP_RECT_SOLO;
-               r_pipe->multirect_mode = DPU_SSPP_MULTIRECT_NONE;
+       num_lm = dpu_crtc_get_num_lm(crtc_state);
+       num_stages = (num_lm + 1) / 2;
+       for (stage_id = 0; stage_id < num_stages; stage_id++) {
+               for (i = stage_id * PIPES_PER_STAGE; i < (stage_id + 1) * 
PIPES_PER_STAGE; i++) {
+                       pipe = &pstate->pipe[i];
+                       pipe_cfg = &pstate->pipe_cfg[i];
+
+                       if (drm_rect_width(&pipe_cfg->src_rect) == 0)
+                               break;
+
+                       pipe->sspp = dpu_rm_reserve_sspp(&dpu_kms->rm, 
global_state, crtc, &reqs);
+                       if (!pipe->sspp)
+                               return -ENODEV;
+
+                       r_pipe = &pstate->pipe[i + 1];
+                       r_pipe_cfg = &pstate->pipe_cfg[i + 1];
+
+                       /*
+                        * If current pipe is the first pipe in pipe pair, check
+                        * multi-rect opportunity for the 2nd pipe in the pair.
+                        * SSPP multi-rect mode cross mixer pairs is not 
supported.
+                        */
+                       if ((i % PIPES_PER_STAGE == 0) &&
+                           drm_rect_width(&r_pipe_cfg->src_rect) != 0 &&
+                           dpu_plane_try_multirect_parallel(pipe, pipe_cfg, 
r_pipe, r_pipe_cfg,
+                                                             pipe->sspp,
+                                                             
msm_framebuffer_format(plane_state->fb),
+                                                             
dpu_kms->catalog->caps->max_linewidth)) {
+                               i++;
+                       } else {
+                               /* multirect is not possible, use two SSPP 
blocks */
+                               pipe->multirect_index = DPU_SSPP_RECT_SOLO;
+                               pipe->multirect_mode = DPU_SSPP_MULTIRECT_NONE;
+                               DPU_DEBUG_PLANE(pdpu, "allocating sspp_%d for 
pipe %d.\n",
+                                               pipe->sspp->idx - SSPP_NONE, i);
+                       }
+               }
        }
 
        return dpu_plane_atomic_check_sspp(plane, state, crtc_state);

-- 
2.34.1

Reply via email to