On 08/09/2024 15:28, Jonas Karlman wrote:
Update successfully read EDID during hotplug processing to ensure the
connector diplay_info is always up-to-date.
Signed-off-by: Jonas Karlman <jo...@kwiboo.se>
---
v2: No change
---
drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
index c19307120909..7bd9f895f03f 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
@@ -2457,6 +2457,18 @@ dw_hdmi_connector_detect(struct drm_connector
*connector, bool force)
status = dw_hdmi_detect(hdmi);
+ /* Update EDID during hotplug processing (force=false) */
+ if (status == connector_status_connected && !force) {
+ const struct drm_edid *drm_edid;
+
+ drm_edid = dw_hdmi_edid_read(hdmi, connector);
+ if (drm_edid)
+ drm_edid_connector_update(connector, drm_edid);
+ cec_notifier_set_phys_addr(hdmi->cec_notifier,
+ connector->display_info.source_physical_address);
+ drm_edid_free(drm_edid);
+ }
+
if (status == connector_status_disconnected)
cec_notifier_phys_addr_invalidate(hdmi->cec_notifier);
I wonder why we should read edid at each dw_hdmi_connector_detect() call,
AFAIK it should only be when we have HPD pulses
Neil
