[PATCH v2 01/10] drm: bridge: dw_hdmi: Disable scrambler feature when not supported

[Jonas Karlman]

The scrambler feature can be left enabled when hotplugging from a sink
and mode that require scrambling to a sink that does not support SCDC or
scrambling.

Typically a blank screen or 'no signal' message can be observed after
using a HDMI 2.0 4K@60Hz mode and then hotplugging to a sink that only
support HDMI 1.4.

Fix this by disabling the scrambler feature when SCDC is not supported.

Fixes: 264fce6cc2c1 ("drm/bridge: dw-hdmi: Add SCDC and TMDS Scrambling 
support")
Reported-by: Christopher Obbard <chris.obb...@collabora.com>
Signed-off-by: Jonas Karlman <jo...@kwiboo.se>
---
v2: New patch
---
 drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c 
b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
index 0031f3c54882..9e7f86a0bf5c 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
@@ -2117,6 +2117,8 @@ static void hdmi_av_composer(struct dw_hdmi *hdmi,
                                    HDMI_MC_SWRSTZ);
                        drm_scdc_set_scrambling(hdmi->curr_conn, 0);
                }
+       } else if (hdmi->version >= 0x200a) {
+               hdmi_writeb(hdmi, 0, HDMI_FC_SCRAMBLER_CTRL);
        }
 
        /* Set up horizontal active pixel width */
-- 
2.46.0