On Mon, Aug 01, 2022 at 03:19:00PM +0200, Marek Vasut wrote:
> The ICN6211 is capable of swapping the output DPI RGB/BGR color channels,
> document a DT property to select this swap in DT. This can be useful on
> hardware where such swap happens.
We should ensure this series[1] works for you instead.
> Signed-off-by: Marek Vasut <ma...@denx.de>
> Cc: Jagan Teki <ja...@amarulasolutions.com>
> Cc: Laurent Pinchart <laurent.pinch...@ideasonboard.com>
> Cc: Linus Walleij <linus.wall...@linaro.org>
> Cc: Rob Herring <r...@kernel.org>
> Cc: Robert Foss <robert.f...@linaro.org>
> Cc: Sam Ravnborg <s...@ravnborg.org>
> Cc: dri-devel@lists.freedesktop.org
> Cc: devicet...@vger.kernel.org
> ---
> .../devicetree/bindings/display/bridge/chipone,icn6211.yaml | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> diff --git
> a/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
> b/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
> index 18563ebed1a96..e721dd76e6640 100644
> --- a/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
> +++ b/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
> @@ -33,6 +33,12 @@ properties:
> Optional external clock connected to REF_CLK input.
> The clock rate must be in 10..154 MHz range.
>
> + blue-and-red-swap:
'swap' assumes I know the default order and I don't. Better to make the
property name describe the end result. ('invert' properties have the
same issue)
> + description:
> + If defined, the DPI output blue and red channels are swapped,
> + i.e. RGB becomes BGR.
> + type: boolean
> +
> enable-gpios:
> description: Bridge EN pin, chip is reset when EN is low.
Rob
[1] https://lore.kernel.org/r/20220628181838.2031-3-max.oss...@gmail.com
