The ICN6211 is capable of swapping the output DPI RGB/BGR color channels,
implement support for this and add DT property "blue-and-red-swap" to
select the RGB/BGR channel order.

Signed-off-by: Marek Vasut <ma...@denx.de>
Cc: Jagan Teki <ja...@amarulasolutions.com>
Cc: Laurent Pinchart <laurent.pinch...@ideasonboard.com>
Cc: Linus Walleij <linus.wall...@linaro.org>
Cc: Robert Foss <robert.f...@linaro.org>
Cc: Sam Ravnborg <s...@ravnborg.org>
Cc: dri-devel@lists.freedesktop.org
---
 drivers/gpu/drm/bridge/chipone-icn6211.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/bridge/chipone-icn6211.c 
b/drivers/gpu/drm/bridge/chipone-icn6211.c
index 7ee1858bab321..7d64172373a35 100644
--- a/drivers/gpu/drm/bridge/chipone-icn6211.c
+++ b/drivers/gpu/drm/bridge/chipone-icn6211.c
@@ -30,6 +30,8 @@
 #define PD_CTRL(n)             (0x0a + ((n) & 0x3)) /* 0..3 */
 #define RST_CTRL(n)            (0x0e + ((n) & 0x1)) /* 0..1 */
 #define SYS_CTRL(n)            (0x10 + ((n) & 0x7)) /* 0..4 */
+#define SYS_CTRL_0_COLOR_ORDER_RGB     0x0
+#define SYS_CTRL_0_COLOR_ORDER_BGR     0x5
 #define SYS_CTRL_1_CLK_PHASE_MSK       GENMASK(5, 4)
 #define CLK_PHASE_0                    0
 #define CLK_PHASE_1_4                  1
@@ -155,6 +157,7 @@ struct chipone {
        struct clk *refclk;
        unsigned long refclk_rate;
        bool interface_i2c;
+       bool color_swap;
 };
 
 static const struct regmap_range chipone_dsi_readable_ranges[] = {
@@ -426,7 +429,9 @@ static void chipone_atomic_enable(struct drm_bridge *bridge,
        /* Configure PLL settings */
        chipone_configure_pll(icn, mode);
 
-       chipone_writeb(icn, SYS_CTRL(0), 0x40);
+       chipone_writeb(icn, SYS_CTRL(0), 0x40 |
+                      (icn->color_swap ? SYS_CTRL_0_COLOR_ORDER_BGR :
+                                         SYS_CTRL_0_COLOR_ORDER_RGB));
        sys_ctrl_1 = 0x88;
 
        if (bus_flags & DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE)
@@ -680,6 +685,9 @@ static int chipone_parse_dt(struct chipone *icn)
                return PTR_ERR(icn->enable_gpio);
        }
 
+       icn->color_swap = of_property_read_bool(dev->of_node,
+                                               "blue-and-red-swap");
+
        icn->panel_bridge = devm_drm_of_get_bridge(dev, dev->of_node, 1, 0);
        if (IS_ERR(icn->panel_bridge))
                return PTR_ERR(icn->panel_bridge);
-- 
2.35.1

Reply via email to