On 06/09/13 21:29, Russell King wrote:
This patch adds support for the pair of LCD controllers on the Marvell
Armada 510 SoCs. This driver supports:
- multiple contiguous scanout buffers for video and graphics
- shm backed cacheable buffer objects for X pixmaps for Vivante GPU
acceleration
- dual lcd0 and lcd1 crt operation
- video overlay on each LCD crt
- page flipping of the main scanout buffers
Included in this commit is the core driver with no output support; output
support is platform and encoder driver dependent.
Signed-off-by: Russell King <rmk+ker...@arm.linux.org.uk>
---
[...]
diff --git a/drivers/gpu/drm/armada/armada_crtc.c
b/drivers/gpu/drm/armada/armada_crtc.c
new file mode 100644
index 0000000..e5ab4cb
--- /dev/null
+++ b/drivers/gpu/drm/armada/armada_crtc.c
@@ -0,0 +1,766 @@
+/*
+ * Copyright (C) 2012 Russell King
+ * Rewritten from the dovefb driver, and Armada510 manuals.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
[...]
+static void armada_drm_crtc_update(struct armada_crtc *dcrtc)
+{
+ uint32_t dumb_ctrl;
+
+ dumb_ctrl = dcrtc->cfg_dumb_ctrl;
+
+ if (!dpms_blanked(dcrtc->dpms))
+ dumb_ctrl |= CFG_DUMB_ENA;
+
+ /*
+ * When a dumb interface isn't under 24bit, it might be
+ * under SPI or GPIO. If set to 7, this will force
+ * LCD_D[23:0] to output blank color and damage GPIO
+ * and SPI behaviour. So leave it as-is unless in
+ * DUMB24_RGB888_0 mode.
+ */
+ if (dpms_blanked(dcrtc->dpms) &&
+ (dumb_ctrl & DUMB_MASK) == DUMB24_RGB888_0) {
+ dumb_ctrl &= ~DUMB_MASK;
+ dumb_ctrl |= DUMB_BLANK;
+ }
+
+ /*
+ * The spec is unclear about the polarities of the syncs.
+ * We assume their non-inverted state is active high.
+ */
nit: "We confirmed their non-inverted state is active high."
+ if (dcrtc->crtc.mode.flags & DRM_MODE_FLAG_NCSYNC)
+ dumb_ctrl |= CFG_INV_CSYNC;
+ if (dcrtc->crtc.mode.flags & DRM_MODE_FLAG_NHSYNC)
+ dumb_ctrl |= CFG_INV_HSYNC;
+ if (dcrtc->crtc.mode.flags & DRM_MODE_FLAG_NVSYNC)
+ dumb_ctrl |= CFG_INV_VSYNC;
+
+ if (dcrtc->dumb_ctrl != dumb_ctrl) {
+ dcrtc->dumb_ctrl = dumb_ctrl;
+ writel_relaxed(dumb_ctrl, dcrtc->base + LCD_SPU_DUMB_CTRL);
+ }
+}
[...]
diff --git a/drivers/gpu/drm/armada/armada_drv.c
b/drivers/gpu/drm/armada/armada_drv.c
new file mode 100644
index 0000000..bb70cf5
--- /dev/null
+++ b/drivers/gpu/drm/armada/armada_drv.c
@@ -0,0 +1,326 @@
+/*
+ * Copyright (C) 2012 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/clk.h>
+#include <linux/module.h>
+#include <drm/drmP.h>
+#include <drm/drm_crtc_helper.h>
+#include "armada_crtc.h"
+#include "armada_drm.h"
+#include "armada_gem.h"
+#include "armada_hw.h"
+#include "armada_ioctl.h"
+#include "armada_ioctlP.h"
+
+static int armada_drm_load(struct drm_device *dev, unsigned long flags)
+{
+ struct armada_private *priv;
+ struct resource *res[ARRAY_SIZE(priv->dcrtc)];
+ struct resource *mem = NULL;
+ int ret, n, i;
+
+ memset(res, 0, sizeof(res));
+
+ for (n = i = 0; ; n++) {
+ struct resource *r = platform_get_resource(dev->platformdev,
+ IORESOURCE_MEM, n);
+ if (!r)
+ break;
+
+ if (resource_size(r) > SZ_4K)
+ mem = r;
nit again: The register address window of Dove LCD is 64k although you
are right an no more than 512B are used. Also a comment would be nice,
that everything above 4k (64k) is interpreted as gfx mem.
+ else if (i < ARRAY_SIZE(priv->dcrtc))
+ res[i++] = r;
+ else
+ return -EINVAL;
+ }
+
+ if (!res[0] || !mem)
+ return -ENXIO;
+
+ if (!devm_request_mem_region(dev->dev, mem->start,
+ resource_size(mem), "armada-drm"))
+ return -EBUSY;
+
+ priv = devm_kzalloc(dev->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv) {
+ DRM_ERROR("failed to allocate private\n");
+ ret = -ENOMEM;
+ goto err_buf;
+ }
+
+ dev->dev_private = priv;
+
+ /* Mode setting support */
+ drm_mode_config_init(dev);
+ dev->mode_config.min_width = 0;
+ dev->mode_config.min_height = 0;
+ dev->mode_config.max_width = 2048;
+ dev->mode_config.max_height = 2048;
+ dev->mode_config.preferred_depth = 24;
+ dev->mode_config.funcs = &armada_drm_mode_config_funcs;
+ drm_mm_init(&priv->linear, mem->start, resource_size(mem));
+
+ /* Create all LCD controllers */
+ for (n = 0; n < ARRAY_SIZE(priv->dcrtc); n++) {
+ struct clk *clk;
+
+ if (!res[n])
+ break;
+
+ clk = clk_get_sys("dovefb.0", "extclk");
To be precise: the above should have the index at extclk as there
is two extclk inputs that can be used for both lcdcs. So currently,
as armada_crtc is hard-coding extclk0 input it should be
"armadafb.%d", "extclk0".
But I know, clocking in general will work-out with parent select for
clk-mux and DT support.
[...]
diff --git a/drivers/gpu/drm/armada/armada_overlay.c
b/drivers/gpu/drm/armada/armada_overlay.c
new file mode 100644
index 0000000..68c4efd
--- /dev/null
+++ b/drivers/gpu/drm/armada/armada_overlay.c
@@ -0,0 +1,514 @@
+/*
+ * Copyright (C) 2012 Russell King
+ * Rewritten from the dovefb driver, and Armada510 manuals.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
[...]
+int armada_overlay_put_image_ioctl(struct drm_device *dev, void *data,
+ struct drm_file *file)
+{
+ struct drm_armada_overlay_put_image *args = data;
+ struct armada_private *priv = dev->dev_private;
+ struct armada_overlay *ovl = priv->overlay;
+ struct armada_gem_object *obj;
+ struct armada_crtc *dcrtc;
+ uint32_t stride_uv, stride_yc, src_hw, dst_hw, dst_yx;
+ bool planar = false;
+ int ret, idx;
+
+ if (!ovl) {
+ DRM_DEBUG_DRIVER("no overlay");
+ return -ENODEV;
+ }
+
+ if (!(args->flags & ARMADA_OVERLAY_ENABLE)) {
+ mutex_lock(&dev->mode_config.mutex);
+ mutex_lock(&dev->struct_mutex);
+
+ armada_drm_overlay_off(dev, ovl);
+
+ mutex_unlock(&dev->struct_mutex);
+ mutex_unlock(&dev->mode_config.mutex);
+
+ return 0;
+ }
+
+// DRM_DEBUG_DRIVER("flags %x handle %x src %dx%d dst %dx%d+%d+%d\n",
+// args->flags, args->bo_handle, args->src_scan_width,
args->src_scan_height,
+// args->dst_width, args->dst_height, args->dst_x, args->dst_y);
nit: Reminder for a hopefully soon to surface non-RFC patch.
[...]
diff --git a/drivers/gpu/drm/armada/armada_slave.c
b/drivers/gpu/drm/armada/armada_slave.c
new file mode 100644
index 0000000..422a345
--- /dev/null
+++ b/drivers/gpu/drm/armada/armada_slave.c
@@ -0,0 +1,138 @@
+/*
+ * Copyright (C) 2012 Russell King
+ * Rewritten from the dovefb driver, and Armada510 manuals.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
[...]
+static int armada_drm_conn_slave_create(struct drm_connector *conn, const void
*data)
+{
+ const struct armada_drm_slave_config *config = data;
+ struct drm_encoder_slave *slave;
+ struct i2c_adapter *adap;
+ int ret;
+
+ conn->interlace_allowed = config->interlace_allowed;
+ conn->doublescan_allowed = config->doublescan_allowed;
+ conn->polled = config->polled;
+
+ drm_connector_helper_add(conn, &armada_drm_slave_helper_funcs);
+
+ slave = kzalloc(sizeof(*slave), GFP_KERNEL);
+ if (!slave)
+ return -ENOMEM;
+
+ slave->base.possible_crtcs = config->crtcs;
+
+ adap = i2c_get_adapter(config->i2c_adapter_id);
+ if (!adap) {
+ kfree(slave);
+ return -EPROBE_DEFER;
+ }
+
+ ret = drm_encoder_init(conn->dev, &slave->base,
+ &armada_drm_slave_encoder_funcs,
+ DRM_MODE_ENCODER_TMDS);
+ if (ret) {
+ DRM_ERROR("unable to init encoder\n");
+ i2c_put_adapter(adap);
+ kfree(slave);
+ return ret;
+ }
+
+ ret = drm_i2c_encoder_init(conn->dev, slave, adap, &config->info);
+ i2c_put_adapter(adap);
+ if (ret) {
+ DRM_ERROR("unable to init encoder slave\n");
+ armada_drm_slave_destroy(&slave->base);
+ return ret;
+ }
+
+ drm_encoder_helper_add(&slave->base, &drm_slave_encoder_helpers);
+
+ ret = slave->slave_funcs->create_resources(&slave->base, conn);
+ if (ret) {
+ armada_drm_slave_destroy(&slave->base);
+ return ret;
+ }
+
+ ret = drm_mode_connector_attach_encoder(conn, &slave->base);
+ if (ret) {
+ armada_drm_slave_destroy(&slave->base);
+ return ret;
+ }
+
+ conn->encoder = &slave->base;
+
+ return ret;
+}
+
+static const struct armada_output_type armada_drm_conn_slave = {
+ .connector_type = DRM_MODE_CONNECTOR_HDMIA,
For a rework of DRM slave encoder API, there should also be some way to
get .connector_type and .encoder_type above from that slave encoder.
IMHO it should be up to the slave encoder to determine connector and
encoder type.
[...]
diff --git a/drivers/gpu/drm/armada/armada_slave.h
b/drivers/gpu/drm/armada/armada_slave.h
new file mode 100644
index 0000000..1b86696
--- /dev/null
+++ b/drivers/gpu/drm/armada/armada_slave.h
@@ -0,0 +1,26 @@
+/*
+ * Copyright (C) 2012 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef ARMADA_TDA19988_H
+#define ARMADA_TDA19988_H
nit: ARMADA_SLAVE_H
+
+#include <linux/i2c.h>
+#include <drm/drmP.h>
+
+struct armada_drm_slave_config {
+ int i2c_adapter_id;
+ uint32_t crtcs;
+ uint8_t polled;
+ bool interlace_allowed;
+ bool doublescan_allowed;
+ struct i2c_board_info info;
+};
+
+int armada_drm_connector_slave_create(struct drm_device *dev,
+ const struct armada_drm_slave_config *);
+
+#endif
Thanks again for sharing the driver as RFC! Will test soon and post
promised tda998x sync patches.
Sebastian
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
