[PATCH RFC 8/8] DRM: Armada: add support for drm tda19988 driver

[Russell King]

Signed-off-by: Russell King <rmk+ker...@arm.linux.org.uk>
---
 drivers/gpu/drm/armada/Kconfig      |    9 +++++++
 drivers/gpu/drm/armada/armada_drv.c |   42 +++++++++++++++++++++++++++++++++++
 2 files changed, 51 insertions(+), 0 deletions(-)

diff --git a/drivers/gpu/drm/armada/Kconfig b/drivers/gpu/drm/armada/Kconfig
index c7a0a94..87e62dd 100644
--- a/drivers/gpu/drm/armada/Kconfig
+++ b/drivers/gpu/drm/armada/Kconfig
@@ -13,3 +13,12 @@ config DRM_ARMADA
          This driver provides no built-in acceleration; acceleration is
          performed by other IP found on the SoC.  This driver provides
          kernel mode setting and buffer management to userspace.
+
+config DRM_ARMADA_TDA1998X
+       bool "Support TDA1998X HDMI output"
+       depends on DRM_ARMADA != n
+       depends on I2C && DRM_I2C_NXP_TDA998X = y
+       default y
+       help
+         Support the TDA1998x HDMI output device found on the Solid-Run
+         CuBox.
diff --git a/drivers/gpu/drm/armada/armada_drv.c 
b/drivers/gpu/drm/armada/armada_drv.c
index bb70cf5..c18ba0c 100644
--- a/drivers/gpu/drm/armada/armada_drv.c
+++ b/drivers/gpu/drm/armada/armada_drv.c
@@ -16,6 +16,42 @@
 #include "armada_ioctl.h"
 #include "armada_ioctlP.h"
 
+#ifdef CONFIG_DRM_ARMADA_TDA1998X
+#include <drm/i2c/tda998x.h>
+#include "armada_slave.h"
+
+static struct tda998x_encoder_params params = {
+       /* With 0x24, there is no translation between vp_out and int_vp
+       FB      LCD out Pins    VIP     Int Vp
+       R:23:16 R:7:0   VPC7:0  7:0     7:0[R]
+       G:15:8  G:15:8  VPB7:0  23:16   23:16[G]
+       B:7:0   B:23:16 VPA7:0  15:8    15:8[B]
+       */
+       .swap_a = 2,
+       .swap_b = 3,
+       .swap_c = 4,
+       .swap_d = 5,
+       .swap_e = 0,
+       .swap_f = 1,
+       .audio_cfg = BIT(2),
+       .audio_frame[1] = 1,
+       .audio_format = AFMT_SPDIF,
+       .audio_sample_rate = 44100,
+};
+
+static const struct armada_drm_slave_config tda19988_config = {
+       .i2c_adapter_id = 0,
+       .crtcs = 1 << 0, /* Only LCD0 at the moment */
+       .polled = DRM_CONNECTOR_POLL_CONNECT | DRM_CONNECTOR_POLL_DISCONNECT,
+       .interlace_allowed = true,
+       .info = {
+               .type = "tda998x",
+               .addr = 0x70,
+               .platform_data = &params,
+       },
+};
+#endif
+
 static int armada_drm_load(struct drm_device *dev, unsigned long flags)
 {
        struct armada_private *priv;
@@ -88,6 +124,12 @@ static int armada_drm_load(struct drm_device *dev, unsigned 
long flags)
                }
        }
 
+#ifdef CONFIG_DRM_ARMADA_TDA1998X
+       ret = armada_drm_connector_slave_create(dev, &tda19988_config);
+       if (ret)
+               goto err_kms;
+#endif
+
        ret = drm_vblank_init(dev, n);
        if (ret)
                goto err_kms;
-- 
1.7.4.4

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel