[PATCH V2 08/11] drm/bridge: tc358767: Move bridge ops setup into tc_probe_edp_bridge_endpoint()

[Marek Vasut]

The bridge ops are specific to the bridge configuration, move them
into tc_probe_edp_bridge_endpoint() to permit cleaner addition of
DSI-to-DPI mode. No functional change.

Signed-off-by: Marek Vasut <ma...@denx.de>
Cc: Jonas Karlman <jo...@kwiboo.se>
Cc: Laurent Pinchart <laurent.pinch...@ideasonboard.com>
Cc: Maxime Ripard <max...@cerno.tech>
Cc: Neil Armstrong <narmstr...@baylibre.com>
Cc: Sam Ravnborg <s...@ravnborg.org>
---
V2: - New patch
---
 drivers/gpu/drm/bridge/tc358767.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/bridge/tc358767.c 
b/drivers/gpu/drm/bridge/tc358767.c
index 55b7f3fb9eec9..7dae18de76c97 100644
--- a/drivers/gpu/drm/bridge/tc358767.c
+++ b/drivers/gpu/drm/bridge/tc358767.c
@@ -1676,6 +1676,11 @@ static int tc_probe_edp_bridge_endpoint(struct tc_data 
*tc)
                tc->bridge.type = DRM_MODE_CONNECTOR_DisplayPort;
        }
 
+       tc->bridge.funcs = &tc_bridge_funcs;
+       if (tc->hpd_pin >= 0)
+               tc->bridge.ops |= DRM_BRIDGE_OP_DETECT;
+       tc->bridge.ops |= DRM_BRIDGE_OP_EDID;
+
        return ret;
 }
 
@@ -1757,11 +1762,6 @@ static int tc_probe(struct i2c_client *client, const 
struct i2c_device_id *id)
        if (ret)
                return ret;
 
-       tc->bridge.funcs = &tc_bridge_funcs;
-       if (tc->hpd_pin >= 0)
-               tc->bridge.ops |= DRM_BRIDGE_OP_DETECT;
-       tc->bridge.ops |= DRM_BRIDGE_OP_EDID;
-
        tc->bridge.of_node = dev->of_node;
        drm_bridge_add(&tc->bridge);
 
-- 
2.34.1