On 05/19/2013 08:01 AM, Jean-Francois Moine wrote:
On Sat, 18 May 2013 21:30:09 +0200
Sebastian Hesselbarth<sebastian.hesselba...@gmail.com> wrote:
So in the end, we will have a DT node for the HW controllers found
in Dove SoCs, a node for TDA998x, and a node for the video card, i.e.
_how_ lcd controllers, external encoders, clocks, maybe audio, ...
are hooked up on that specific board.
Here is my dove-cubox.dts. What is wrong with it?
Oh come on, seriously?
There is _nothing_ wrong with it, it already reflects what I told you
would be required for generic Dove SoC board video.
video {
compatible = "marvell,dove-video";
};
As you may have noticed, the RFC node I sent yesterday. Is in _no_ way
different from a functional point of view. I added a video-memory
property, I renamed the compatible string. And I moved clocks property
to the video card *but* as I said in the RFC description:
"This adds a video card node required for rmk's dove_drm driver. Reg
property matches reserved memory region (currently 16M at top of
memory), clocks property should carry extclk0 for now."
It is a node *required for rmk's dove_drm driver* for you to _test_
that very driver.
&lcd0 {
status = "okay";
clocks =<&core_clk 3>,<0>,<&lcdclk>,<&si5351 0>;
marvell,port-type =<11>; /* HDMIA */
marvell,external-encoder =<&tda998x>;
};
Again, there is no DT support in *rmk's driver*! I didn't add those
to the RFC node. I provided a DT node to *test* rmk driver. While
you were busy with complaining about things we already answered,
I did test the driver on both Cubox and D2Plug. Now I can start
with looking into rmk's driver and _suggest_ to fix this or that.
/* --- test (not cubox) ---- *
&dcon { status = "okay"; };
&lcd1 {
status = "okay";
clocks =<&core_clk 3>,<0>,<&lcdclk>,<0>;
marvell,port-type =<1>;
display-timings {
mode {
hactive =<1920>;
vactive =<1080>;
hfront-porch =<88>;
hsync-len =<44>;
hback-porch =<148>;
vfront-porch =<4>;
vsync-len =<5>;
vback-porch =<36>;
clock =<148500>;
};
};
I would be surprised if, lcd1 will ever be capable of driving
1080p60 on a *VGA port*!
Seriously, start _reading_ what we say. I want all those
features I already told you for your driver, in mainline driver
too. All I told you was to prevent you from doing dirty little
Cubox specific hacks that I would have to remove for e.g. D2Plug.
*But* if you ask me if we should take Russell's or your driver
as a basis, the answer is Russell's. Colon.
Sebastian
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
