Hi Nancy,
On Mon, 2021-09-06 at 15:15 +0800, Nancy.Lin wrote:
> MT8195 vdosys1 has more than 32 reset bits and a different reset base
> than other chips. Modify mmsys for support 64 bit and different reset
> base.
>
> Signed-off-by: Nancy.Lin <nancy....@mediatek.com>
> ---
> drivers/soc/mediatek/mt8195-mmsys.h | 1 +
> drivers/soc/mediatek/mtk-mmsys.c | 15 ++++++++++++---
> drivers/soc/mediatek/mtk-mmsys.h | 1 +
> 3 files changed, 14 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/soc/mediatek/mt8195-mmsys.h
> b/drivers/soc/mediatek/mt8195-mmsys.h
> index 648baaec112b..f67801c42fd9 100644
> --- a/drivers/soc/mediatek/mt8195-mmsys.h
> +++ b/drivers/soc/mediatek/mt8195-mmsys.h
> @@ -123,6 +123,7 @@
> #define MT8195_VDO1_MIXER_SOUT_SEL_IN 0xf68
> #define MT8195_MIXER_SOUT_SEL_IN_FROM_DISP_MIXER (0 << 0)
>
> +#define MT8195_VDO1_SW0_RST_B 0x1d0
> #define MT8195_VDO1_MERGE0_ASYNC_CFG_WD 0xe30
> #define MT8195_VDO1_MERGE1_ASYNC_CFG_WD 0xe40
> #define MT8195_VDO1_MERGE2_ASYNC_CFG_WD 0xe50
> diff --git a/drivers/soc/mediatek/mtk-mmsys.c
> b/drivers/soc/mediatek/mtk-mmsys.c
> index 060065501b8a..97cb26339ef6 100644
> --- a/drivers/soc/mediatek/mtk-mmsys.c
> +++ b/drivers/soc/mediatek/mtk-mmsys.c
> @@ -18,6 +18,8 @@
> #include "mt8365-mmsys.h"
> #include "mt8195-mmsys.h"
>
> +#define MMSYS_SW_RESET_PER_REG 32
> +
> static const struct mtk_mmsys_driver_data mt2701_mmsys_driver_data = {
> .clk_driver = "clk-mt2701-mm",
> .routes = mmsys_default_routing_table,
> @@ -48,12 +50,14 @@ static const struct mtk_mmsys_driver_data
> mt8173_mmsys_driver_data = {
> .clk_driver = "clk-mt8173-mm",
> .routes = mmsys_default_routing_table,
> .num_routes = ARRAY_SIZE(mmsys_default_routing_table),
> + .sw_reset_start = MMSYS_SW0_RST_B,
> };
>
> static const struct mtk_mmsys_driver_data mt8183_mmsys_driver_data = {
> .clk_driver = "clk-mt8183-mm",
> .routes = mmsys_mt8183_routing_table,
> .num_routes = ARRAY_SIZE(mmsys_mt8183_routing_table),
> + .sw_reset_start = MMSYS_SW0_RST_B,
> };
>
> static const struct mtk_mmsys_driver_data mt8365_mmsys_driver_data = {
> @@ -74,6 +78,7 @@ static const struct mtk_mmsys_driver_data
> mt8195_vdosys1_driver_data = {
> .num_routes = ARRAY_SIZE(mmsys_mt8195_routing_table),
> .config = mmsys_mt8195_config_table,
> .num_configs = ARRAY_SIZE(mmsys_mt8195_config_table),
> + .sw_reset_start = MT8195_VDO1_SW0_RST_B,
> };
>
> struct mtk_mmsys {
> @@ -126,19 +131,23 @@ static int mtk_mmsys_reset_update(struct
> reset_controller_dev *rcdev, unsigned l
> {
> struct mtk_mmsys *mmsys = container_of(rcdev, struct mtk_mmsys, rcdev);
> unsigned long flags;
> + u32 offset;
> u32 reg;
> int i;
>
> + offset = (id / MMSYS_SW_RESET_PER_REG) * sizeof(u32);
> + id = id % MMSYS_SW_RESET_PER_REG;
> +
> spin_lock_irqsave(&mmsys->lock, flags);
>
> - reg = readl_relaxed(mmsys->regs + MMSYS_SW0_RST_B);
> + reg = readl_relaxed(mmsys->regs + mmsys->data->sw_reset_start + offset);
>
> if (assert)
> reg &= ~BIT(id);
> else
> reg |= BIT(id);
>
> - writel_relaxed(reg, mmsys->regs + MMSYS_SW0_RST_B);
> + writel_relaxed(reg, mmsys->regs + mmsys->data->sw_reset_start + offset);
>
> spin_unlock_irqrestore(&mmsys->lock, flags);
>
> @@ -237,7 +246,7 @@ static int mtk_mmsys_probe(struct platform_device *pdev)
> spin_lock_init(&mmsys->lock);
>
> mmsys->rcdev.owner = THIS_MODULE;
> - mmsys->rcdev.nr_resets = 32;
> + mmsys->rcdev.nr_resets = 64;
If only MT8195 vdosys1 has more than 32 reset bits, this should be kept
at 32 for the others.
regards
Philipp
